It’s the most annoying scenario: You found out your router in your new house or apartment, and your wifi is functioning correctly until you discover your download or streaming creaking to a halt therein area that’s just outside your router’s range—like the precise spot where you watch Apple TV on the couch, or stream music at your workbench, or binge movies in bed.
There are lots of tricks you’ll use to squeak a touch more range out of your existing equipment. If your networking gear is old, otherwise you don’t want to affect tons of hassle, I usually recommend buying something new: a far better router that supports the fastest wireless speeds your devices can handle, a wifi mesh system with a fanatical backhaul connection, or maybe a super-cheap wifi extender if you only need a touch more range for less complicated tasks.
If you don’t desire to spend a penny more for your setup, you’ve got an alternative: using an old router to increase or build onto your primary router’s wireless signal. You recognize the one—that trusty, retired workhorse you’ve kept around just in case of emergency.
Instead of letting your old route collect more dust, you’ll reuse it to improve your wireless network range. This won’t be an ideal solution, especially if it’s some older wireless-n router that you’re trying to force into your newer wireless-ac world. Still, it can prevent some cash and possibly offer you better wireless performance than a more comfortable extender. These are some basic methods; let’s see more of them.
Option 1: A Brand New Access Point
The reasonable thing you’ll do with an old wifi router you’re not using is to restore it into an easy wireless access point. Goodbye, as your house or apartment is wired for Ethernet, it’s a simple thanks to giving a neighborhood wireless connectivity that doesn’t have already got it or features a weak signal.
To get begun, connect your older router (WAN port) to your newer router (LAN port) and join your more senior router tool. Pull up your older router’s settings—more on the way to do this here—and shop around for a few quiet “access point mode,” as it’s commonly called. Counting on the router might even be called “bridge mode,” which may be a confusing term that we’ll address later in this article.
Place your router during a perfect place for wherever you’re getting to expand your wireless capabilities, assuming you’ve got a long-enough coaxial cable or in-wall cabling. It’s convenient to line up your old router’s wireless networks with an equivalent SSID and password as your existing wireless networks.
Option 2: Change Your Routes Settings
If you’re unsure if you’re selecting the right mode or not, see if your older router’s manual or the outline of the feature within the router’s UI indicates that this mode will allow your older router to attach to a different router using its wireless signal. Most significantly, your older router will also be ready to accept wireless connections from devices.
Suppose you think that about it, this setup replaces the coaxial cable of the previous step—the one connecting your new router and your old router—with a wireless signal. This type of structure also comes with one crucial caveat.
Wireless clients connected to the second router won’t enjoy an equivalent performance because the wireless clients are connected to the primary router. This is why you’re always happier using an Ethernet connection, where possible, to attach access points to your primary router. A wireless bridge could be more convenient, but your speeds can suffer.
Option 3: Set A Static Address
It’s a little tricky, but next, you would like to type during a static IP address for the repeater. i prefer to use 192.168.1.2 (one above the bottom router’s address) to denote that it’s a part of the LAN’s infrastructure and not a client or printer.
I am nearly done. Confirm that the subnet mask matches the router’s – the subnet mask is what the router uses to work out if the network segment and client are local or remote. This information can generally be found within the router’s management software, on an equivalent screen, because it only sets the IP address. the foremost standard default subnet mask is 255.255.255.0, and there’s no reason to vary it.
Before you’re done, check the box for Disable Wireless Client Association and enter the router’s MAC address; it’s generally on a sticker on the router’s rear or underside or included with the device documentation. To learn more about IP addresses, you can (https://routerlogin.mobi/192-168-0-2/) click here.
Finally, if you’re not looking to spend money on upgrading your home wifi setup, you should think about using an older router to increase your wireless signal in your house. Every bit helps. Wherever possible, connect your older router to your existing network using coaxial cable.